Festive Lighting Applications
Festive Lighting brings excitement and joy to communities across Southampton and we at SSE are here to help make sure your displays are not only a great success, but most importantly, safe for the general public to enjoy.
If you are considering installing festive lighting in a public space you may not be aware of the procedures that are in place and what your obligations are. This website will guide you, step by step, through the process and highlight any extra information you will need to supply with your application.
Street lights are designed by their manufacturers to only bear the weight of a lantern and any additional weight, load or attachment added to the street light must be thoroughly assessed prior to installation to ensure public safety.
There are 3 stages to completing your SSE Festive Lighting Application, please carefully read the information below before you make your application.
PLEASE NOTE! ALL APPLICATIONS MUST BE RECIEVED BY SSE BY 1ST SEPTEMBER
APPLICATIONS MADE AFTER THIS TIME MAY NOT BE PROCESSED IN TIME FOR THE START OF THE FESTIVE SEASON.
Before you make your Stage 1 Festive Lighting Application check you have . . .
1. The correct Southampton Highways permission?
Before starting your SSE Festive Lighting Application please ensure you have the correct permission from Southampton Highways. If you have not yet completed this stage please contact email@example.com You will need to supply a copy of your Highways approval to us with your SSE application.
2. A signed SSE Consent Form and Third Party Attachment Agreement?
This should be completed and signed by the applicant. Please complete the yellow sections on the form.
You can download the forms for a Third Party Attachment Agreement here.
3. An Unmetered Supply Agreement?
This is an agreement between you and the power company supplying the energy to the streetlights. They will request the wattage of your decorations, amongst other information, so that they can calculate the amount of energy your decorations will be consuming over the network for the duration of your display. You will need a new agreement each year you make a Festive Lighting Application.
You can download the form for an Unmetered Supply Agreement with SSE PD here.
4. A map showing column locations and numbers?
Please ensure that the column locations are clearly marked and up to date column numbers are given. You can find an up to date map of our column locations here.
5. The specification of each decoration you wish to install?
Please complete a decoration specification form for each design you intend to use and submit these with an accompanying photo or design drawing. All of this information should be available from the decoration manufacturer.
Download decoration specification form here.
6. A copy of your £10m public liability insurance.
7. Confirmation that the contractor installing your festive lighting is HERS certified.
HERS is the Highways Electrical Registration Scheme that ensures engineers working on street lights have the correct qualifications and safety training. All SSE Operatives require this level of training and therefore this standard is also required for all other third parties working on street lighting infrastructure. Please supply your contractors name and business address as well as a copy of their HERS certificate along with each of the working operatives’ current HERS cards, which should be in date.
If you have all of the information above you may submit your Stage 1 application to TPA@sse.com Please submit your application and copies of all the requested information above no later than 1st September to ensure your application is processed in time for the start of the festive season.
IMPORTANT INFORMATION ABOUT THE TYPES OF DISPLAY THAT ARE NOT PERMITTED:
- Decorations strung between columns: for example, festoon or catenary decorations
- Power taken from the top of street light to any trees (Possible Solution: The installation of a feeder pillar to connect the lights to.)
- Oversized single motifs that exceed the columns capabilities: structural calculations will determine this
- Power taken from the top of street lights to supply decorations mounted on buildings (Possible Solutions: With the building owners permission commando sockets could be installed on the exterior on the building
Please submit the information detailed above to TPA@sse.com the team can then begin processing of your application.
Our Third Party Attachments team will evaluate the information you have sent us in stage one and two. We may then require that structural tests are carried out on the street lights in your application. If you are advised to arrange for structural tests please read the below information carefully as not all types of structural testing conform to our requirements. We will not be able to approve your application without the correct type of structural testing.
What are suitable structural test results?
There are three main types of Structural Tests:
Type 1 Structural Tests: (Visual)
These are undertaken by SSE as part of our maintenance regime. When our Operatives
visit a street light, they will visually check for signs of external damage or rusting.
Type 2 Structural Tests: (Non Destructive)
These are undertaken by a third party contractor who will test the thickness of the column in various places to ensure it is capable to continue to take the weight of the lantern.
Type 3 Structural Test: (Calculations)
These are undertaken by qualified Structural Engineers who will use the Type 2 structural
test results (as above) and incorporate them into detailed calculations in accordance with BS EN 40. These are based on the specific decorations you wish to install and confirm the street lights suitability to take the extra load and wind effect of the decoration.
To ensure public safety we may ask you to carry out 'Type 3' structural tests and calculations for some or all of the street lights included in your application. The only street lights that do not require structural testing are called "Heavy Duty" which are specifically designed to take extra loading. When making your application our team can confirm if any of your requested streetlights fall into this category.
When organising your structural tests and calculations it is important to inform your Structural Engineer of the some of the clauses within our Third Party Attachment Agreement letter:
- A clearance of 2.1 metres must be maintained in cases where Third Party Attachments are erected over a footpath. Within Southampton this clearance is increased to 2.5m. No part of any sign may be nearer that 0.5m metres to the face of the kerb.
- It is important that when considering your structural tests, you highlight to your engineer that there is a minimum mounting height of 2.5m if the 0.5m rule has been adhered to.
- If your decorations sit less than 0.5m from the kerb you will need to consider traffic that could be compromised by lower mounting heights for instance lorries, heavy goods vehicles and buses which would need the height clearance increased to a minimum of 5.7m.
Please consider your mounting heights in relation to the above stipulations as the correct mounting heights will be required by the Structural Engineer to complete accurate structural calculations.
Please submit your test results to TPA@sse.com The team will complete the processing of your application. You will be notified in writing when your application is approved.